Zinc coated with high wear-resisting organic coating reinforced
gabion mesh
The tensile strength, ductility and corrosion resistance of
galvanized coated high wear-resisting organic coating reinforced
Gabion mesh steel wire should meet the requirements. Low carbon
steel wire coated with high wear-resistant organic coating
aluminum-zinc mixed rare earth alloy coating should be used under
water, water level fluctuation area, gradual ocean condition, salt
spray area, soil high acid and high alkaline area.
When the galvanized coating with high wear-resistant organic
coating reinforced gabion structure is used in urban and rural
flood control, urban landscape, water transmission, drainage and
other projects, it should meet the flood control standards at the
same time should meet the requirements of local town development
planning, and have certain foresight, to do according to local
conditions and local materials. Galvanized coating high
wear-resistant organic coating reinforced gabion in the design
should be based on the actual situation, as far as possible to
protect the ecological environment, hydrophobic, natural, and the
surrounding landscape coordination, the mesh size should be
combined with the size of the local material selection, steel wire
specifications and performance should be in line with the project
environment.
Zinc coated with high wear-resistant organic coating reinforced
Gabion production process includes:
(1) Double stranded, five stranded, using mechanical stranded woven
into six hinged, hexagonal mesh mesh structure.
(2) The flexible structure formed by the box assembled by grid and
filled with the block material meeting the requirements is an
important part of river management, ecological protection, water
resources utilization, dike construction, flood control and road
and bridge subgrade engineering, and is the main element of the
construction of ecological grid system
Zinc coated with high wear-resisting organic coating reinforced
gabion material:
(1) Corrosion resistance, wear resistance, high strength low carbon
steel wire through hot dip galvanizing process for corrosion
resistance treatment, the thickness of galvanized protective layer
can be produced according to the construction requirements of
hydraulic engineering drawings, galvanized layer can reach the
highest of more than 500g/m².
(2) Plated Golfan steel wire: divided into -5% aluminum - mixed
rare earth alloy coating. Zinc -10% aluminum - mixed rare earth
alloy coating.
(3) Coated wire/coated wire: PVC or PE coating is added on the
basis of galvanized or plated Galfan steel wire.
(4) The use of steel reinforcement + plated Golfan steel wire
combination to meet the engineering requirements of gabion gabion
cages.
(5) plated Golfan steel wire + silicone coated plastic, its
performance is better than ordinary material reinforced gabion
gabion net products.
Zinc coated with high wear-resisting organic coating reinforced
gabion structure layout:
Zinc coated with high wear-resistant organic coating reinforced
gabion used as a shore protection of ecological grid solid shore
retaining wall and ecological grid green slope protection,
according to the overall requirements of the project, choose the
appropriate layout form, When the natural slope is less than or
equal to 1:1.5, the protection form should choose green shore slope
protection: when the natural slope is greater than 1:1.5, the
protection form should choose gabion mesh solid shore retaining
wall, reinforced gabion solid shore retaining wall or compound
section structure according to the actual situation. Zinc coated
with high wear-resisting organic coating reinforced gabion and
ecological grid green slope protection, according to the actual
situation of the project can be a single structure, can also be a
combination of structure.
Zinc coated with high wear-resistant organic coating reinforced
gabion construction:
(1) galvanized coating with high wear-resistant organic coating
reinforced Gabine should be slope reaming or bottom protection,
according to the design requirements of flat laying surface, slope
or base surface should be smooth, dense, no impurities. Check the
size of galvanized coated high wear-resistant organic coating
reinforced gabions and solid cages, and prepare installation tools,
mesh wire diameters, end wire diameters and edge wire diameters,
all of which should meet the design requirements. Each layer of
solid cage should be appropriately placed as a "D" box; The
exterior appearance of masonry should be smooth and beautiful.
Ecological grid hanging net commonly used for roadbed
reinforcement, rockfall protection, according to the design
requirements of construction. The construction of backfill soil
should be based on mechanical spreading, supplemented by manual
coordination. The loose paving soil should be compacted after it is
50m~100m higher.
(2) hot dip galvanized coated with high wear-resistant organic
coating reinforced gabion cage assembly suitable for engineering
requirements of the stone cage cage.
(3) packing construction, packing construction, should be uniform
to the same layer of multiple gabion gabion cage box stone, should
not be a single reinforced gabion cage one-time throw.
| Type | double twisted woven wire mesh |
| Hole Shape | hexagonal |
| Material | low carbon steel wire ,heavy galvanized wire ,galfan wire ,pvc
coated wire |
| Aperature | 6×8cm ,8×10cm,10×12cm ,12×15cm |
| Size (L×W ×H) | 2x1x1m, 3x1x1m, 4x1x1m, 2x1x0.5m, 4x1x0.5m,5.2×1×0.5m ,3×1×0.5m
,6×2×0.3m |
| Wire Guage | 2.0mm-4.0mm |
| Surface Treatment | Galvanized /PVC Coated |
| Application | flood control ,retaining wall |
| Features | corrosion resistance ,easily assembled |
| Color | silver or black/green ,ect |
Steps of using gabion net
Flood control gabion net is a good choice for reservoir anti-scour
and water storage project. The reasons are as follows:
1. It is a very reliable choice as embankment protection;
2. It is relatively simple and can shorten the construction period
of the project very well;
3. Ecology is incomparable with other construction methods.
FAQ:
Q: Are you a trading company or manufacturer ?
A: We are factory. We are manufacturer of Wire Mesh .
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
10-15 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=100000USD, 100% in advance.
Payment>=100000USD, 30% T/T in advance ,balance against copy of
B/L.
